Telescopic built-in extractor Gorenje BHP623E11B
Telescopic built-in extractor Gorenje BHP623E11B-bm18120053
Telescopic Gorenje built-in hood BHP623E11B
Polyurethane Filters-The unique AdaptAir technology and aluminum grease filters are enhanced with a special polyurethane foam that eliminates up to 98% of all fats and other impurities. At the same time, the device supports absorption extremely efficient.
LED Lighting- The LED lamps provide excellent and high-efficiency lighting over the kitchen counter and around it and represent an important sturquettical and functional element in the cuisine. Their useful life is 30 times longer and saves up to 10 times more energy.
Extractor hoods with internal circulation-the hoods with internal circulation absorb saturated with steam and smells air, filter it and return it to the kitchen. If no extraction pin is available, the internal circulation is also an option. In this case, the air passes Through a carbon filter that removes steam and smells and clean air goes back to the kitchen. The hoods with internal circulation are easy to install and are usually used in apartments where the installation of drainage pipes leading out of the building is difficult. Depending on the frequency of use of the extractor, the carbon filter must be replaced once or twice a year.
Noise level-In today's home, the kitchen is a new key place, which in turn focuses its attention on the noise levels created by the aspirators. In recent years the capacity of the cooker hoods has risen significantly and the sound absorbing materials are increasingly used in the Gorenje hoods.
Useful Tips-• Switch the hood on before you start cooking, as this increases its power.• Leave the extractor on for another 15 minutes after finishing cooking to remove any residues from the Smell.
• Do not open a window near the hood, as this affects the air circulation and interferes with the pressure.
• Select an absorber with a width equal to or greater than the countertop to achieve the best effect.
Capacity-what capacity should the modern extractor hood have?The capacity depends mainly on the size of the kitchen. As a rule, the absorber should be able to refresh the air between 10 and 20 times per hour. For example, in a kitchen with dimensions 4 x 4 m, with a ceiling height of 2.5 m, the hood should renovate 400-800 m³ per hour. When installing the hood, there are always prerequisites for pressure loss. Therefore, it is important to pay attention to the following:
• Always pay attention to the recommended diameter (Ø) marked on the drainage pipe
• Where possible, use smooth tubes to minimize resistance
• Try to make the installation as short as possible and with less connections
• The round forms in pipes and joints are preferable, with a view to minimizing the loss of pressure.
- Sold by: Furniture Bogdan
- Product Code: bm18120053
- Availability: 999 items
- Delivery: This shop is currently not delivering to United States
- Department: Kitchen appliances
- 120.60 $
Shipping to Your Destination
If delivery to Your destination is not avalable, try contacting the seller. They might be able to adjust and ship Your goods!
Customs and Import Taxes
Buyers are advised to check applicable customs and import taxes prior to ordering. The Marketplace and Sellers are not responsible for delays due to customs.