The timely irrigation of plants is one of the most important factors falling in love with the crop. Often rains are insufficient to satisfy the needs of plants. This is why many farmers in the evening stand with a hose in hand or with a watering can to wear the lifeblood for garden plants. This kind of watering is effective enough, but takes a lot of time.
We are happy to offer you a more modern drip irrigation system with the help of which you can automate the care of plants.
For the installation of the irrigation system you need a reservoir with water or connection with plumbing and polyethylene hose (not included).
For greenhouses with dimensions greater than 6 m in length, you should purchase an extension kit.
The kit contains:
-Crane reduced 1/2 х 16 mm-1 PCs
-Tee-16 x 16 x 16 mm-4 pcs.
-Straight connection with ring 17x16 х 16 mm-4 pcs.
-Tape plug with Ring 17 mm-4 pcs.
-Clutch with tape nut 1х17 (repair fitting)-1 PCs
-Hose Stopper-16 mm-1 PCs
-Blanking tube LDPE, 16 mm-3.6 m
-Drip Hose 17 mm-24 m
If you connect the irrigation system directly to the plumbing network it is necessary to install a pressure regulator, otherwise the ribbon drip hose will be damaged. If you are connecting the system to a reservoir, you need a purification filter, otherwise you risk clogging the kapkoobrazovatelite of the tape hose.
The allowable pressure is from 0.3 to 1.1 bar
| Purpose|| For hobby greenhouses and gardens|
| Power|| Water Tank or plumbing|
| Setting the watering Frequency|| Optional|
| Watering duration|
| Watering timer|| Not|
| Automation|| Not|
| Type of watering|| Drip|
| Plant quantity/Maximum line length|| 4 x 6 meters|
| Possibility of extension|| To|