GLUE for the Reotans
GLUE for the Reotans-254086
Function: The Visbella repair kit on the rear window is designed to repair scratched or disconnected lines of the air vent grille. The surfaces to be glued must be smooth and flat. Repairs can be done ideally at temperatures of (10 Celsius to 24 Celsius). It provides inexpensive, high-quality repair of damaged grilles and sections to remove defacers of the rear window. List of pack sizes: 1 x 2 ml silver for repair 1 x masking tape 1 x Pure fabric 1 x Cotton pads 1 x alcohol Pre-pad 1 x Plastic scraper 1 x Tutorial features and Benefits: 1. Used to repair scratched or interrupted Reans in the rear Window 2. Make a permanent, invisible repair. 3. Quick and easy with cheap costs. 4. The Kleb is specially designed for conducting electricity. 5. Make a permanent, invisible repair. 6. Follow the instructions easily by step. Stage one. Determine which network line is interrupted and where the repairs are to be performed, disconnect the rear deflocer. Clean the surface of the cup with a towel. Step 2. Carefully place the masking strips on the broken grid area. Make sure that the two ends of the broken line align with the masking strips. Make sure there is a good seal between the window and masking tapes. Push the masking strips to the glass and make sure all air bubbles are removed. Step 3. Apply the silver to repair silver on top of the masking strips with the supplied cotton swabs. To avoid residues of hard material at the bottom or side of the bottle, stir the silver to repair silver with cotton pads before use, step 4. Use a plastic scraper to make the surfaces smooth and flat. Make sure that the silver to repair the silver overlaps with both ends of the dashed line. Look out the window from the inside, no light should be visible through the repaired area. If the light appears, apply another layer of the repair material. Step 5. Remove masking tapes immediately. Step 6. After removing the masking tapes, dry the silver for repair. (A) curing within 15-20 minutes, if left to dry naturally. (B) curing within 2-5 minutes, if dry with a hair dryer. Step 7. Clean the extra silver repair tool on the glass with an alcohol pad. Wait 24 hours before turning on the deflector.
- Sold by: AUTOTEDY
- Product Code: 254086
- Availability: 100 items
- Delivery: This shop is currently not delivering to United States
- Department: Technical Sprays and Adhesives
- 9.41 $
Shipping to Your Destination
If delivery to Your destination is not avalable, try contacting the seller. They might be able to adjust and ship Your goods!
Customs and Import Taxes
Buyers are advised to check applicable customs and import taxes prior to ordering. The Marketplace and Sellers are not responsible for delays due to customs.